The UFS_RESET pin is expected to be wired to the reset pin of the
primary UFS memory, it's a general purpose output pin. Reorder it and
expose it as a gpio, so that the UFS driver can toggle it.

The QCS615 TLMM pin controller has GPIOs 0-122, so correct the
gpio-rangs to 124.

The QCS8300 TLMM pin controller has GPIOs 0-132, so correct the
gpio-rangs to 134.

Signed-off-by: Lijuan Gao <redacted>
---
Lijuan Gao (6):
      dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
      dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
      pinctrl: qcom: correct the number of ngpios for QCS615
      pinctrl: qcom: correct the number of ngpios for QCS8300
      arm64: dts: qcom: correct gpio-ranges for QCS615
      arm64: dts: qcom: correct gpio-ranges for QCS8300

 Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml  | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml | 2 +-
 arch/arm64/boot/dts/qcom/qcs615.dtsi                             | 2 +-
 arch/arm64/boot/dts/qcom/qcs8300.dtsi                            | 2 +-
 drivers/pinctrl/qcom/pinctrl-qcs615.c                            | 2 +-
 drivers/pinctrl/qcom/pinctrl-qcs8300.c                           | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)
---
base-commit: 91e71d606356e50f238d7a87aacdee4abc427f07
change-id: 20241211-correct_gpio_ranges-ed8a25ad22e7

Best regards,
-- 
Lijuan Gao [off-list ref]