[PATCH v2 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
From: Andreas Kemnade <andreas@kemnade.info>
Date: 2024-10-10 12:30:07
Also in:
linux-omap, lkml
Subsystem:
omap device tree support, the rest · Maintainers:
Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
To properly have things running after cold boot, define GPIO regulators. Naming is based on board file. In the vendor kernel they are enabled in a function called bt2ws_dcdc_init() if the system is not booted just to charge the battery. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- .../boot/dts/ti/omap/omap4-epson-embt2ws.dts | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+)
diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
index 339e52ba3614..4462747b5cf5 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts@@ -46,6 +46,55 @@ key-lock { }; }; + cb_v18: regulator-cb-v18 { + pinctrl-names = "default"; + pinctrl-0 = <&cb_v18_pins>; + compatible = "regulator-fixed"; + regulator-name = "cb_v18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cb_v33: regulator-cb-v33 { + pinctrl-names = "default"; + pinctrl-0 = <&cb_v33_pins>; + compatible = "regulator-fixed"; + regulator-name = "cb_v33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + regulator-cb-v50 { + pinctrl-names = "default"; + pinctrl-0 = <&cb_v50_pins>; + compatible = "regulator-fixed"; + regulator-name = "cb_v50"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lb_v50: regulator-lb-v50 { + /* required for many things at the head (probably indirectly) */ + pinctrl-names = "default"; + pinctrl-0 = <&lb_v50_pins>; + compatible = "regulator-fixed"; + regulator-name = "lb_v50"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + unknown_supply: unknown-supply { compatible = "regulator-fixed"; regulator-name = "unknown";
@@ -336,6 +385,24 @@ OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE3) /* gpio25 */ >; }; + cb_v18_pins: pinmux-cb-v18-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE3) /* gpio28 */ + >; + }; + + cb_v33_pins: pinmux-cb-v33-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE3) /* gpio190 */ + >; + }; + + cb_v50_pins: pinmux-cb-v50-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE3) /* gpio191 */ + >; + }; + gpio_keys_pins: pinmux-gpio-key-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x56, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio35 */
@@ -387,6 +454,12 @@ OMAP4_IOPAD(0x005c, PIN_OUTPUT | MUX_MODE1) >; }; + lb_v50_pins: pinmux-lb-v50-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE3) /* gpio27 */ + >; + }; + mcbsp2_pins: pinmux-mcbsp2-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */
--
2.39.5