Thread (20 messages) 20 messages, 3 authors, 2024-09-05

Re: [PATCH 5/5] ARM: dts: microchip: Rename LED sub nodes name

From: <Andrei.Simion@microchip.com>
Date: 2024-08-16 08:52:46
Also in: linux-arm-kernel, linux-leds, lkml

Hello Alex,

On 15.08.2024 10:57, Alexander Dahl wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Hello Andrei,
quoted
Am Wed, Aug 14, 2024 at 03:26:33PM +0300 schrieb Andrei Simion:
dtbs_check warnings:
leds: 'd[0-9]', 'ds[0-9]' do not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
leds: 'red', 'green', 'blue' do not match any of regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Rename the led sub nodes according to devicetree
specification and leds-gpio.yaml.

Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
---
Split the bloadted patch into small patches on topics
based on comments:
https://lore.kernel.org/linux-arm-kernel/89f51615-0dee-4ab0-ab72-e3c057fee1e7@tuxon.dev/ (local)
---
 arch/arm/boot/dts/microchip/aks-cdu.dts        | 8 ++++----
 arch/arm/boot/dts/microchip/animeo_ip.dts      | 8 ++++----
 arch/arm/boot/dts/microchip/at91-sam9x60ek.dts | 6 +++---
 arch/arm/boot/dts/microchip/at91rm9200ek.dts   | 6 +++---
 arch/arm/boot/dts/microchip/at91sam9260ek.dts  | 4 ++--
 arch/arm/boot/dts/microchip/at91sam9261ek.dts  | 6 +++---
 arch/arm/boot/dts/microchip/at91sam9263ek.dts  | 4 ++--
 arch/arm/boot/dts/microchip/at91sam9g20ek.dts  | 4 ++--
 8 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
index 52e166c8a365..95a0639c5579 100644
--- a/arch/arm/boot/dts/microchip/aks-cdu.dts
+++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
@@ -98,23 +98,23 @@ rootfs@500000 {
      leds {
              compatible = "gpio-leds";

-             red {
+             led-red {
                      gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
                      linux,default-trigger = "none";
              };

-             green {
+             led-green {
                      gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "none";
                      default-state = "on";
              };

-             yellow {
+             led-yellow {
                      gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "none";
              };

-             blue {
+             led-blue {
                      gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "none";
              };
As reported with [ref]
already, this will probably change sysfs paths and thus might break
userspace depending on those paths.  Did you consider adding a label
to avoid this?

(Added linux-leds to Cc.)
https://elixir.bootlin.com/linux/v6.11-rc3/source/Documentation/devicetree/bindings/leds/common.yaml#L54
Based on the information provided above: "If omitted, the label is 
taken from the node name (excluding the unit address)." and "This 
property is deprecated"
So, in your opinion what should I do? use function and color?
My patch reason is to rename the label to avoid the warnings.

Best Regards,
Andrei Simion
Greets
Alex
quoted
diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
index 911c8d9ee013..52ac840bcd35 100644
--- a/arch/arm/boot/dts/microchip/animeo_ip.dts
+++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
@@ -146,23 +146,23 @@ ohci: usb@500000 {
      leds {
              compatible = "gpio-leds";

-             power_green {
+             led-power-green {
                      label = "power_green";
                      gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
                      linux,default-trigger = "heartbeat";
              };

-             power_red {
+             led-power-red {
                      label = "power_red";
                      gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
              };

-             tx_green {
+             led-tx-green {
                      label = "tx_green";
                      gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
              };

-             tx_red {
+             led-tx-red {
                      label = "tx_red";
                      gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
              };
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index b9a21f9f9a6d..da31b07d6828 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -53,17 +53,17 @@ leds {
              pinctrl-0 = <&pinctrl_gpio_leds>;
              status = "okay"; /* Conflict with pwm0. */

-             red {
+             led-red {
                      label = "red";
                      gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
              };

-             green {
+             led-green {
                      label = "green";
                      gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
              };

-             blue {
+             led-blue {
                      label = "blue";
                      gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
                      linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
index 3089912dd6be..641d443e6ca9 100644
--- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
@@ -127,19 +127,19 @@ root@350000  {
      leds {
              compatible = "gpio-leds";

-             ds2 {
+             led-ds2 {
                      label = "green";
                      gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "mmc0";
              };

-             ds4 {
+             led-ds4 {
                      label = "yellow";
                      gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "heartbeat";
              };

-             ds6 {
+             led-ds6 {
                      label = "red";
                      gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
              };
diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
index ed259e2cb853..4933971d0585 100644
--- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -174,13 +174,13 @@ eeprom@50 {
      leds {
              compatible = "gpio-leds";

-             ds1 {
+             led-ds1 {
                      label = "ds1";
                      gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
                      linux,default-trigger = "heartbeat";
              };

-             ds5 {
+             led-ds5 {
                      label = "ds5";
                      gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
              };
diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
index 4d9269cc5f32..9c44177db714 100644
--- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
@@ -192,19 +192,19 @@ watchdog@fffffd40 {
      leds {
              compatible = "gpio-leds";

-             ds8 {
+             led-ds8 {
                      label = "ds8";
                      gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "none";
              };

-             ds7 {
+             led-ds7 {
                      label = "ds7";
                      gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "nand-disk";
              };

-             ds1 {
+             led-ds1 {
                      label = "ds1";
                      gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index a8ea36db4c04..cf5434f9449d 100644
--- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -219,13 +219,13 @@ &pioA 21 GPIO_ACTIVE_HIGH
      leds {
              compatible = "gpio-leds";

-             d3 {
+             led-d3 {
                      label = "d3";
                      gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
                      linux,default-trigger = "heartbeat";
              };

-             d2 {
+             led-d2 {
                      label = "d2";
                      gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
                      linux,default-trigger = "nand-disk";
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
index 6de7a7cd3c07..1e62fd371ddb 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
@@ -14,13 +14,13 @@ / {
      leds {
              compatible = "gpio-leds";

-             ds1 {
+             led-ds1 {
                      label = "ds1";
                      gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
                      linux,default-trigger = "heartbeat";
              };

-             ds5 {
+             led-ds5 {
                      label = "ds5";
                      gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
              };
--
2.34.1
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help