On Tue, Aug 13, 2024 at 12:32:36PM -0400, Frank Li wrote:

On Tue, Aug 13, 2024 at 05:09:52PM +0100, Conor Dooley wrote:

quoted

On Mon, Aug 12, 2024 at 12:28:09PM -0400, Frank Li wrote:

quoted

Convert ziirave-wdt.txt to yaml format.

Additional change:
- Add i2c node in example.
- Add ref to watchdog.yaml

Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
	failed to match any schema with compatible: ['zii,rave-wdt']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
- add ref watchdog.yaml
- Remove timeout-sec
---
 .../bindings/watchdog/zii,rave-wdt.yaml       | 47 +++++++++++++++++++
 .../bindings/watchdog/ziirave-wdt.txt         | 19 --------
 2 files changed, 47 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml
 delete mode 100644 Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml b/Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml
new file mode 100644
index 0000000000000..0206d9ddf872d
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/zii,rave-wdt.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/zii,rave-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac RAVE Watchdog Timer
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>

When you're converting bindings, listing yourself as the maintainer only
really makes sense if you know/care about the hardware IMO.

I faced this problem. I am not sure who I can put as maintainer. How to
decide binding doc maintainer? same as driver maintainer?

Same as the driver maintainer is usually the way to go, yeah.