[PATCH v5 1/2] dt-bindings: extcon-usb-gpio: convert to DT schema format
From: Alexander Stein <hidden>
Date: 2024-02-15 09:32:22
Also in:
linux-arm-kernel, linux-mediatek
Subsystem:
external connector subsystem (extcon), open firmware and flattened device tree bindings, the rest · Maintainers:
MyungJoo Ham, Chanwoo Choi, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Convert the binding to DT schema format. Change the GPIO properties to new naming convention using -gpios as well. Signed-off-by: Alexander Stein <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- .../bindings/extcon/extcon-usb-gpio.txt | 21 -------- .../bindings/extcon/extcon-usb-gpio.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 21 deletions(-) delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
deleted file mode 100644
index dfc14f71e81fb..0000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ /dev/null@@ -1,21 +0,0 @@ -USB GPIO Extcon device - -This is a virtual device used to generate USB cable states from the USB ID pin -connected to a GPIO pin. - -Required properties: -- compatible: Should be "linux,extcon-usb-gpio" - -Either one of id-gpio or vbus-gpio must be present. Both can be present as well. -- id-gpio: gpio for USB ID pin. See gpio binding. -- vbus-gpio: gpio for USB VBUS pin. - -Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: - extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; - } - - &omap_dwc3_1 { - extcon = <&extcon_usb1>; - };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
new file mode 100644
index 0000000000000..136f865b87816
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-usb-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB GPIO Extcon device + +maintainers: + - Alexander Stein <alexander.stein@ew.tq-group.com> + +description: + This is a virtual device used to generate USB cable states from the + USB ID pin connected to a GPIO pin. + Deprecated, use USB connector node instead. + +deprecated: true + +properties: + compatible: + const: linux,extcon-usb-gpio + + id-gpios: + description: An input gpio for USB ID pin. + maxItems: 1 + + vbus-gpios: + description: An input gpio for USB VBus pin, used to detect presence of + VBUS 5V. + maxItems: 1 + +required: + - compatible + +anyOf: + - required: + - id-gpios + - required: + - vbus-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + extcon-usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + };
--
2.34.1