Re: [PATCH V4 1/6] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY

On Wed, Feb 14, 2024 at 5:14 AM Luca Ceresoli [off-list ref] wrote:

Hi Adam,

On Sat, 10 Feb 2024 14:45:57 -0600
Adam Ford [off-list ref] wrote:

quoted

From: Lucas Stach <l.stach@pengutronix.de>

Add a DT binding for the HDMI PHY found on the i.MX8MP SoC.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <redacted>
Reviewed-by: Krzysztof Kozlowski <redacted>

I was a bit puzzled by this v4 series as it comes after v8... however
thanks for keeping up!

It was confusing to me to try and figure out where the latest of each
of the various components were found.  I tried to explain it in the
cover letter, but basically the previous V8 was due to the fact that
some portion of it had been attempted 7 times.  When it was brought to
my attention that the PHY driver I used was not he right one and the
HDMI-TX and the PVI driver were already applied, I reverted to using
the revision history of the version of the PHY driver I pulled which
was V3 and with my changes became V4.

I debated on making this V9, but inreality this code was only
attempted 3 times, and the subsequent device tree stuff had undergone
some changes, but it was easier to keep them paired together with the
PHY driver so the series could be applied as a whole.

I will be making a V5 due to some build-bot feedback and your
feedback, but I'll be sure to pull your tags when I try again.  I just
want to give people around a week to mull it over and test it.

adam

This patch is identical to the v8 I already reviewed, so:

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com