On Wed, 24 Jan 2024 14:07:04 +0800, Billy Tsai wrote:

Document the compatible for aspeed,ast2600-pwm-tach device, which can
support up to 16 PWM outputs and 16 fan tach input.

Signed-off-by: Billy Tsai <redacted>
---
 .../bindings/hwmon/aspeed,g6-pwm-tach.yaml    | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.example.dtb: pwm-tach-controller@1e610000: fan-0: Unevaluated properties are not allowed ('compatible' was unexpected)
	from schema $id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.example.dtb: pwm-tach-controller@1e610000: fan-1: Unevaluated properties are not allowed ('compatible' was unexpected)
	from schema $id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.example.dtb: fan-0: 'tach-ch' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.example.dtb: fan-1: 'tach-ch' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240124060705.1342461-3-billy_tsai@aspeedtech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.