[PATCH 3/3] arm64: dts: rockchip: Add saradc node to rk3588s-indiedroid-nova
flat view
STALE1127d
SUPERSEDED
From: Chris Morgan <hidden>
Date: 2023-09-08 16:42:09
Also in:
linux-rockchip
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v2 [diff vs current]
From: Chris Morgan <redacted> Add ADC support for the Indiedroid Nova, as well as the two ADC buttons found on the device. The buttons are documented as "boot" and "recovery". The boot button is used by the bootloader to boot into USB recovery mode. The recovery button use is currently unknown. Signed-off-by: Chris Morgan <redacted> --- .../dts/rockchip/rk3588s-indiedroid-nova.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 1e2336d3065b..4c2d662d9c97 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts@@ -3,6 +3,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/usb/pd.h> #include "rk3588s.dtsi"
@@ -11,6 +12,34 @@ / { model = "Indiedroid Nova"; compatible = "indiedroid,nova", "rockchip,rk3588s"; + adc_keys0 { + compatible = "adc-keys"; + io-channel-names = "buttons"; + io-channels = <&saradc 0>; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-boot { + label = "boot"; + linux,code = <KEY_PROG1>; + press-threshold-microvolt = <18000>; + }; + }; + + adc_keys1 { + compatible = "adc-keys"; + io-channel-names = "buttons"; + io-channels = <&saradc 1>; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "recovery"; + linux,code = <KEY_PROG2>; + press-threshold-microvolt = <18000>; + }; + }; + aliases { mmc0 = &sdhci; mmc1 = &sdmmc;
@@ -410,6 +439,11 @@ typec5v_pwren: typec5v-pwren { }; }; +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + /* HS400 modes seemed to cause io errors. */ &sdhci { bus-width = <8>;
--
2.34.1