Thread (14 messages) 14 messages, 4 authors, 2023-09-13

Re: [PATCH v2 3/3] riscv: dts: starfive: Drop unused properties and limit frquency

flat view

From: William Qiu <william.qiu@starfivetech.com>
Date: 2023-09-13 10:50:40
Also in: linux-mmc, linux-riscv, lkml


On 2023/9/12 21:23, Emil Renner Berthing wrote:
William Qiu wrote:
quoted
Drop unused properties and limit cclk_in to 50M, thus cancelling the
internal frequency and adopting the by-pass mode.
That's two unrelated changes which should really be in different patches. But
again the hardware still has the relevant field in the syscon registers even if
the driver doesn't use it, so maybe just leave them and just keep this patch
adding the assigned-clock* properties.

/Emil
quoted
Will update.

Best Regards,
William
quoted
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 .../riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 4 ++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi                      | 2 --
 2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index d79f94432b27..d1f2ec308bca 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -205,6 +205,8 @@ &i2c6 {

 &mmc0 {
 	max-frequency = <100000000>;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+	assigned-clock-rates = <50000000>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
@@ -221,6 +223,8 @@ &mmc0 {

 &mmc1 {
 	max-frequency = <100000000>;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+	assigned-clock-rates = <50000000>;
 	bus-width = <4>;
 	no-sdio;
 	no-mmc;
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index e85464c328d0..7b8e841aeef8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -870,7 +870,6 @@ mmc0: mmc@16010000 {
 			fifo-depth = <32>;
 			fifo-watermark-aligned;
 			data-addr = <0>;
-			starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>;
 			status = "disabled";
 		};
@@ -886,7 +885,6 @@ mmc1: mmc@16020000 {
 			fifo-depth = <32>;
 			fifo-watermark-aligned;
 			data-addr = <0>;
-			starfive,sysreg = <&sys_syscon 0x9c 0x1 0x3e>;
 			status = "disabled";
 		};

--
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help