On 9/5/2023 12:23 PM, Krzysztof Kozlowski wrote:

On 05/09/2023 06:43, Rohit Agarwal wrote:

quoted

Add support for USB3 QMP PHY found in SDX75 platform.

Signed-off-by: Rohit Agarwal <redacted>
---

quoted

  
+static const struct qmp_phy_cfg sdx75_usb3_uniphy_cfg = {
+	.lanes			= 1,
+	.offsets		= &qmp_usb_offsets_v5,
+
+	.serdes_tbl		= sdx75_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= sdx75_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_tx_tbl),
+	.rx_tbl			= sdx75_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= sdx75_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sdx75_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sdx75_usb3_uniphy_pcs_usb_tbl),
+	.clk_list		= qmp_v4_sdx55_usbphy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v5_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x1000,
+
+	.has_pwrdn_delay	= true,
+

Stray blank line

quoted

+};
+
  static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
  	.lanes			= 2,
  

@@ -1985,6 +2141,7 @@ static int qmp_usb_init(struct phy *phy)
  	void __iomem *dp_com = qmp->dp_com;
  	int ret;
  
+

No need for this.

This got added because I was trying to debug earlier. Sorry for this.
But this should get caught by checkpatch, shouldnt it? I did run 
checkpatch script.

Thanks,
Rohit.

Best regards,
Krzysztof