[PATCH v3 08/18] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings
From: Dmitry Baryshkov <hidden>
Date: 2023-08-20 14:25:28
Also in:
linux-arm-msm, linux-phy
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by: Konrad Dybcio <redacted> Signed-off-by: Dmitry Baryshkov <redacted> --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 32 ++++++++++----------------- 1 file changed, 12 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 47b8b1d6730a..3c8a2f4e26a3 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi@@ -278,33 +278,25 @@ qusb_phy_0: qusb@79000 { pcie_phy: phy@84000 { compatible = "qcom,ipq6018-qmp-pcie-phy"; - reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ + reg = <0x0 0x00084000 0x0 0x1000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_PCIE0_AUX_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE0_PHY_BCR>, <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; - - pcie_phy0: phy@84200 { - reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ - <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ - <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ - <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ - #phy-cells = <0>; - - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_pcie0_pipe_clk_src"; - #clock-cells = <0>; - }; }; mdio: mdio@90000 {
@@ -756,7 +748,7 @@ pcie0: pci@20000000 { #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy0>; + phys = <&pcie_phy>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
--
2.39.2