On Mon, Jul 24, 2023 at 03:58:23PM +0800, Peng Fan (OSS) wrote:

From: Peng Fan <peng.fan@nxp.com>

V2:
 Add blank line between property and child node in patch 3
 Move compatible in the beginning in patch 8
 For patch 9, the pinctrl settings are same, because drive strengh only
 has a enable/disable bit.

Add flexspi, cm33, thermal, cpuidle, reserved memory nodes
Enable flexspi, lpi2c7, spi-nor, cm33 for i.MX8ULP-EVK
Set default clock for SDHC

Haibo Chen (3):
  arm64: dts: imx8ulp: add flexspi node
  arm64: dts: imx8ulp-evk: add 100MHz/200MHz pinctrl setting for eMMC
  arm64: dts: imx8ulp-evk: enable lpi2c7 bus

Han Xu (1):
  arm64: dts: imx8ulp-evk: add spi-nor device support

Peng Fan (6):
  arm64: dts: imx8ulp: add cm33 node
  arm64: dts: imx8ulp: set default clock for SDHC
  arm64: dts: imx8ulp: add thermal node
  arm64: dts: imx8ulp: add cpuidle node
  arm64: dts: imx8ulp-evk: add reserved memory for cma
  arm64: dts: imx8ulp-evk: enable CM33 node

Applied all, thanks!