On 09/06/2023 20:28, Raymond Hackley wrote:
quoted hunk ↗ jump to hunk
PN547/553, QN310/330 chips on some devices require a pad supply voltage
(PVDD). Otherwise, the NFC won't power up.
Implement support for pad supply voltage pvdd-supply that is enabled by
the nxp-nci driver so that the regulator gets enabled when needed.
Signed-off-by: Raymond Hackley <redacted>
---
drivers/nfc/nxp-nci/i2c.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
index d4c299be7949..6f01152d2c83 100644
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -35,6 +35,7 @@ struct nxp_nci_i2c_phy {
struct gpio_desc *gpiod_en;
struct gpio_desc *gpiod_fw;
+ struct regulator *pvdd;
int hard_fault; /*
* < 0 if hardware error occurred (e.g. i2c err)@@ -263,6 +264,20 @@ static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = {
{ }
};
+static void nxp_nci_i2c_poweroff(void *data)
+{
+ struct nxp_nci_i2c_phy *phy = data;
+ struct device *dev = &phy->i2c_dev->dev;
+ struct regulator *pvdd = phy->pvdd;
+ int r;
+
+ if (!IS_ERR(pvdd) && regulator_is_enabled(pvdd)) {
No, don't send a new version before we finish discussion. One version
per day is enough.
NAK for this part, same reasons as before.
Best regards,
Krzysztof