Re: [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes

On Mon, May 15, 2023 at 04:06:29PM +0530, Kathiravan T wrote:

On 5/9/2023 5:24 PM, Varadarajan Narayanan wrote:

quoted

Add USB phy and controller related nodes

SS PHY need two supplies and HS PHY needs three supplies. 0.925V
and 3.3V are from fixed regulators and 1.8V is generated from
PMIC's LDO

Reviewed-by: Dmitry Baryshkov <redacted>
Signed-off-by: Varadarajan Narayanan <redacted>
---
 Changes in v11:
- Rename dwc_0 -> usb_0_dwc3
 Changes in v10:
- Fix regulator definitions
 Changes in v8:
- Change clocks order to match the bindings
 Changes in v7:
- Change com_aux -> cfg_ahb
 Changes in v6:
- Introduce fixed regulators for the phy
- Resolved all 'make dtbs_check' messages

 Changes in v5:
- Fix additional comments
- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
- 'make dtbs_check' giving the following messages since
  ipq9574 doesn't have power domains. Hope this is ok

	/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
	/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

 Changes in v4:
- Use newer bindings without subnodes
- Fix coding style issues

 Changes in v3:
- Insert the nodes at proper location

 Changes in v2:
- Fixed issues flagged by Krzysztof
- Fix issues reported by make dtbs_check
- Remove NOC related clocks (to be added with proper
  interconnect support)
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 104 ++++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 93b4ba9..42b61f6 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi

@@ -150,6 +150,24 @@
 		method = "smc";
 	};
+	fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;

@@ -191,6 +209,45 @@
 			reg = <0x00060000 0x6000>;
 		};
+		usb_0_qusbphy: phy@7b000 {
+			compatible = "qcom,ipq9574-qusb2-phy";
+			reg = <0x0007b000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@7d000 {
+			compatible = "qcom,ipq9574-qmp-usb3-phy";
+			reg = <0x0007d000 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board_clk>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+		};
+
 		pcie0_phy: phy@84000 {
 			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
 			reg = <0x00084000 0x1000>;

@@ -560,6 +617,53 @@
 			status = "disabled";
 		};
+		usb3: usb@8a00000 {

node address should be updated to 8af8800 ?

Ok. Will update and post a new patchset.

Thanks
Varada