Thread (20 messages) flat view 20 messages, 4 authors, 2023-05-07

Re: [PATCH v2 6/6] riscv: dts: allwinner: d1: Add SPI0 controller node

From: Andre Przywara <andre.przywara@arm.com>
Date: 2023-05-06 22:00:53
Also in: linux-arm-kernel, linux-riscv, linux-spi, linux-sunxi, lkml

On Sat,  6 May 2023 10:30:14 +0300
Maksim Kiselev [off-list ref] wrote:

Hi,
quoted hunk ↗ jump to hunk
Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
an optional SPI flash that connects to the SPI0 controller.

This controller is the same for R329/D1/R528/T113s SoCs and
should be supported by the sun50i-r329-spi driver.

So let's add its DT node.

Signed-off-by: Maksim Kiselev <redacted>
---
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 922e8e0e2c09..a52999240a8e 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -108,6 +108,12 @@ rmii_pe_pins: rmii-pe-pins {
 				function = "emac";
 			};
 
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC2", "PC3", "PC4", "PC5";
+				function = "spi0";
+			};
+
 			/omit-if-no-ref/
 			uart1_pg6_pins: uart1-pg6-pins {
 				pins = "PG6", "PG7";
@@ -447,6 +453,21 @@ mmc2: mmc@4022000 {
 			#size-cells = <0>;
 		};
 
+		spi0: spi@4025000 {
+			compatible = "allwinner,sun20i-d1-spi",
+				     "allwinner,sun50i-r329-spi";
+			reg = <0x04025000 0x300>;
The manual (and the other DTs) use 4K, so please use that here as well.
+			interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
I think we should add the second SPI controller here as well, using
that DBI fallback compatible string.
Above looks correct when compared to the manual.

Thanks,
Andre

+
 		usb_otg: usb@4100000 {
 			compatible = "allwinner,sun20i-d1-musb",
 				     "allwinner,sun8i-a33-musb";
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help