On Tue, Mar 14, 2023 at 11:44:14AM +0100, Johan Hovold wrote:
On Sun, Mar 12, 2023 at 10:18:48PM -0500, Steev Klimaszewski wrote:
quoted
Works, but, not quite well, and with the nvm bits from Tim's patch, we
end up getting closer? I think that is the best way to put it. With
what we currently have, we end up loading hpnv21.bin for our nvm patch
file, however, we actually want (at least on my Thinkpad X13s) the
.b8c file from the Windows partition for our nvm patch; With the b8c
file symlinked to .bin with just my patch set, I am able to connect a
pair of Air Pods Gen1 to the ThinkPad and play back audio, as well as
use them for input. With the .bin file that comes from
linux-firmware, they will still connect, however, they will randomly
disconnect, as well as the audio output is all garbled.
Hmm. Ok, but then we need to ask Lenovo and Qualcomm to release the
firmware files we need for the X13s. Until then using your patch and
"hpnv21.bin" at least works to some extent.
I could connect to one bluetooth speaker without noticing any problems,
but I did indeed get some garbled output when connecting to another. I
have not tried the .b8c file yet though, so this could possibly be some
other incompatibility issue.
I just tried with the hpnv21.b8c from the (somewhat old) windows
installation on my x13s, but the bluetooth speaker that produced garbled
output with the firmware from linux-firmware still does so with the
windows file.
Johan