Re: [PATCH 8/9] ARM: multi_v7_defconfig: Add options to support TQMLS102xA series

Hi Krzysztof,

thanks for the feedback.

Am Donnerstag, 19. Januar 2023, 18:04:31 CET schrieb Krzysztof Kozlowski:

On 19/01/2023 15:42, Alexander Stein wrote:

quoted

This enables drivers used on TQMLS102xA + MBLS1021A.

Do not use "This (commit/patch)".
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submit
ting-patches.rst#L95

Thanks, this sounds much better.

quoted

Signed-off-by: Alexander Stein <redacted>
---

 arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig

b/arch/arm/configs/multi_v7_defconfig index ee184eb37adcf..441a449172368
100644

--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig

@@ -191,6 +191,7 @@ CONFIG_PCI_TEGRA=y

 CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
 CONFIG_PCI_DRA7XX_EP=y

+CONFIG_PCI_LAYERSCAPE=y

 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m

@@ -249,6 +250,7 @@ CONFIG_AHCI_ST=y

 CONFIG_AHCI_IMX=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y

+CONFIG_AHCI_QORIQ=y

 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y

@@ -329,6 +331,7 @@ CONFIG_TOUCHSCREEN_ADC=m

 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_MMS114=m

+CONFIG_TOUCHSCREEN_EDT_FT5X06=m

 CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y

@@ -483,6 +486,7 @@ CONFIG_GPIO_ASPEED_SGPIO=y

 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_EM=y

+CONFIG_GPIO_MPC8XXX=y

module

Sounds reasonable, but it's not actually possible, it's just a bool.

quoted

 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_SYSCON=y

@@ -493,6 +497,7 @@ CONFIG_GPIO_PCA953X=y

 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_PALMAS=y

+CONFIG_GPIO_STMPE=y

module

That one as well, it's just a bool.

quoted

 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y

@@ -533,6 +538,7 @@ CONFIG_SENSORS_INA2XX=m

 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y

+CONFIG_QORIQ_THERMAL=m

 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y

@@ -821,6 +827,8 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m

 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
 CONFIG_SND_SOC_STI_SAS=m

+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m

 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_USB=y

@@ -830,6 +838,7 @@ CONFIG_USB_XHCI_MVEBU=y

 CONFIG_USB_XHCI_TEGRA=m
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y

+CONFIG_USB_EHCI_FSL=y

module

Well, apparently module autoload is broken due to wrong modalias value of ehci 
node created by fsl-mph-dr-of. This setting this as a module is currently not 
working.

quoted

 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_EXYNOS=m
 CONFIG_USB_EHCI_MV=m

@@ -933,6 +942,8 @@ CONFIG_NEW_LEDS=y

 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CPCAP=m

+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_PCA9532_GPIO=y

 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_MAX8997=m

@@ -949,6 +960,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_EDAC=y

+CONFIG_EDAC_LAYERSCAPE=y

 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y

@@ -962,6 +974,7 @@ CONFIG_RTC_DRV_MAX8997=m

 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m

+CONFIG_RTC_DRV_PCF85063=y

module

Okay, module it is. So I assume it is acceptable the system time is set much 
later after mounting rootfs then?

quoted

 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_TWL4030=y

Best regards,
Krzysztof

Best regards,
Alexander