Thread (12 messages) read the whole thread 12 messages, 6 authors, 2023-01-24
STALE1283d LANDED

Landed in mainline as bb065c6fe6f8 on 2023-01-24.

[PATCH 2/2] dt-bindings: mmc: correct pwrseq node names

From: Krzysztof Kozlowski <hidden>
Date: 2023-01-20 08:57:39
Also in: linux-amlogic, linux-arm-kernel, linux-mmc, linux-rockchip, linux-samsung-soc, linux-sunxi, linux-tegra, lkml
Subsystem: multimedia card (mmc), secure digital (sd) and sdio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers: Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Node names should be generic and should not contain underscores.

Signed-off-by: Krzysztof Kozlowski <redacted>
---
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml   | 2 +-
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml | 2 +-
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
index 911a5996e099..588be73168fa 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -41,7 +41,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    sdhci0_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-emmc";
       reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
     };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
index 3397dbff88c2..b35e00e8c65e 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -35,7 +35,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    wifi_pwrseq: wifi_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-sd8787";
       powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
       reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
index 64e3644eefeb..00feaafc1063 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -55,7 +55,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    sdhci0_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-simple";
       reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
       clocks = <&clk_32768_ck>;
-- 
2.34.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help