Hi Geert,
On Thu, Dec 15, 2022 at 10:36 AM Geert Uytterhoeven
[off-list ref] wrote:
Hi Prabhakar,
On Mon, Dec 12, 2022 at 12:58 PM Prabhakar [off-list ref] wrote:
quoted
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.
IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.
The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate
More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.
Example PMA region passes as a DT node from OpenSBI:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Thanks for your patch!
quoted
arch/riscv/include/asm/cacheflush.h | 8 +
arch/riscv/include/asm/errata_list.h | 28 ++-
drivers/soc/renesas/Kconfig | 6 +
drivers/soc/renesas/Makefile | 2 +
drivers/soc/renesas/rzfive/Kconfig | 6 +
drivers/soc/renesas/rzfive/Makefile | 3 +
drivers/soc/renesas/rzfive/ax45mp_cache.c | 256 ++++++++++++++++++++++
Given this touches arch/riscv/include/asm/, I don't think the
code belongs under drivers/soc/renesas/.
Ok. Do you have any suggestions on where you want me to put this code?
Cheers,
Prabhakar