Thread (18 messages) 18 messages, 4 authors, 2022-11-23

Re: [PATCH v4 02/10] dt-bindings: display: bridge: Add MHDP DP for i.MX8MQ

From: Krzysztof Kozlowski <hidden>
Date: 2022-11-22 08:28:15
Also in: dri-devel, linux-arm-kernel, linux-phy, lkml

On 21/11/2022 08:23, Sandor Yu wrote:
quoted hunk ↗ jump to hunk
Add bindings for i.MX8MQ MHDP DisplayPort.

Signed-off-by: Sandor Yu <redacted>
---
 .../display/bridge/cdns,mhdp-imx8mq-dp.yaml   | 93 +++++++++++++++++++
 1 file changed, 93 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml
new file mode 100644
index 000000000000..d82f3ceddaa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp-imx8mq-dp.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp-imx8mq-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MHDP Displayport bridge
+
+maintainers:
+  - Sandor Yu <Sandor.yu@nxp.com>
+
+description:
+  The Cadence MHDP Displayport TX interface.
+
+properties:
+  compatible:
+    enum:
+      - cdns,mhdp-imx8mq-dp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: MHDP DP APB clock.
+
+  phys:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Hotplug cable plugin.
+      - description: Hotplug cable plugout.
+
+  interrupt-names:
+    items:
+      - const: plug_in
+      - const: plug_out
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port from display controller output.
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port to DP connector.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-names
+  - phys
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mhdp_dp: dp-bridge@32c00000 {
+        compatible = "cdns,mhdp-imx8mq-dp";
+        reg = <0x32c00000 0x100000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "plug_in", "plug_out";
+        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+        phys = <&dp_phy>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                mhdp_in: endpoint {
+                    remote-endpoint = <&dcss_out>;
+                };
As Rob suggested, you allowed property for output to DP port. However it
is not in the example. If this is a bridge, what does it bridge if there
is no output connector?


Best regards,
Krzysztof
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help