The dsa-port.yaml binding had several references that can be common to all
ethernet ports, not just dsa-specific ones. Break out the generic bindings
to ethernet-switch-port.yaml they can be used by non-dsa drivers.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
---
 .../devicetree/bindings/net/dsa/dsa-port.yaml | 26 +----------
 .../bindings/net/ethernet-switch-port.yaml    | 44 +++++++++++++++++++
 .../bindings/net/ethernet-switch.yaml         |  4 +-
 MAINTAINERS                                   |  1 +
 4 files changed, 50 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml

diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
index 10ad7e71097b..c5144e733511 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet Switch port Device Tree Bindings
+title: DSA Switch port Device Tree Bindings
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>

@@ -15,12 +15,9 @@ description:
   Ethernet switch port Description
 
 allOf:
-  - $ref: /schemas/net/ethernet-controller.yaml#
+  - $ref: /schemas/net/ethernet-switch-port.yaml#
 
 properties:
-  reg:
-    description: Port number
-
   label:
     description:
       Describes the label associated with this port, which will become

@@ -57,25 +54,6 @@ properties:
       - rtl8_4t
       - seville
 
-  phy-handle: true
-
-  phy-mode: true
-
-  fixed-link: true
-
-  mac-address: true
-
-  sfp: true
-
-  managed: true
-
-  rx-internal-delay-ps: true
-
-  tx-internal-delay-ps: true
-
-required:
-  - reg
-
 # CPU and DSA ports must have phylink-compatible link descriptions
 if:
   oneOf:

diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
new file mode 100644
index 000000000000..cb1e5e12bf0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Switch port Device Tree Bindings
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vivien Didelot <vivien.didelot@gmail.com>
+
+description:
+  Ethernet switch port Description
+
+$ref: ethernet-controller.yaml#
+
+properties:
+  reg:
+    description: Port number
+
+  phy-handle: true
+
+  phy-mode: true
+
+  fixed-link: true
+
+  mac-address: true
+
+  sfp: true
+
+  managed: true
+
+  rx-internal-delay-ps: true
+
+  tx-internal-delay-ps: true
+
+required:
+  - reg
+
+additionalProperties: true
+
+...

diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
index fbaac536673d..f698857619da 100644
--- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml

@@ -36,7 +36,9 @@ patternProperties:
         type: object
         description: Ethernet switch ports
 
-        $ref: /schemas/net/dsa/dsa-port.yaml#
+        allOf:
+          - $ref: /schemas/net/dsa/dsa-port.yaml#
+          - $ref: ethernet-switch-port.yaml#