Thread (14 messages) 14 messages, 4 authors, 2022-10-18

Re: [PATCH V7 6/7] remoteproc: imx_rproc: request mbox channel later

From: Mathieu Poirier <mathieu.poirier@linaro.org>
Date: 2022-10-14 17:49:15
Also in: linux-arm-kernel, linux-remoteproc, lkml

On Fri, Oct 14, 2022 at 11:10:36AM +0800, Peng Fan (OSS) wrote:
quoted hunk ↗ jump to hunk
From: Peng Fan <peng.fan@nxp.com>

It is possible that when remote processor crash, the communication
channel will be broken with garbage value in mailbox, such as
when Linux is issuing a message through mailbox, remote processor
crashes, we need free & rebuild the mailbox channels to make sure
no garbage value in mailbox channels.

So move the request/free to start/stop for managing remote procesosr in
Linux, move to attach/detach for remote processor is out of control of
Linux.

Previous, we just request mbox when attach for CM4 boot early before
Linux, but if mbox defer probe, remoteproc core will do resource cleanup
and corrupt resource table for later probe.

So move request mbox ealier and still keep mbox request when attach
for self recovery case, but keep a check when request/free mbox.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_rproc.c | 39 ++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 917e6db39572..1183de84a4c0 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -84,6 +84,8 @@ struct imx_rproc_mem {
 #define ATT_CORE_MASK   0xffff
 #define ATT_CORE(I)     BIT((I))
 
+static int imx_rproc_xtr_mbox_init(struct rproc *rproc);
+static void imx_rproc_free_mbox(struct rproc *rproc);
 static int imx_rproc_detach_pd(struct rproc *rproc);
 
 struct imx_rproc {
@@ -357,6 +359,10 @@ static int imx_rproc_start(struct rproc *rproc)
 	struct arm_smccc_res res;
 	int ret;
 
+	ret = imx_rproc_xtr_mbox_init(rproc);
+	if (ret)
+		return ret;
+
 	switch (dcfg->method) {
 	case IMX_RPROC_MMIO:
 		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
@@ -407,6 +413,8 @@ static int imx_rproc_stop(struct rproc *rproc)
 
 	if (ret)
 		dev_err(dev, "Failed to stop remote core\n");
+	else
+		imx_rproc_free_mbox(rproc);
 
 	return ret;
 }
@@ -592,6 +600,22 @@ static void imx_rproc_kick(struct rproc *rproc, int vqid)
 
 static int imx_rproc_attach(struct rproc *rproc)
 {
+	return imx_rproc_xtr_mbox_init(rproc);
+}
+
+static int imx_rproc_detach(struct rproc *rproc)
+{
+	struct imx_rproc *priv = rproc->priv;
+	const struct imx_rproc_dcfg *dcfg = priv->dcfg;
+
+	if (dcfg->method != IMX_RPROC_SCU_API)
+		return -EOPNOTSUPP;
+
+	if (imx_sc_rm_is_resource_owned(priv->ipc_handle, priv->rsrc_id))
+		return -EOPNOTSUPP;
+
+	imx_rproc_free_mbox(rproc);
+
 	return 0;
 }
 
@@ -610,6 +634,7 @@ static struct resource_table *imx_rproc_get_loaded_rsc_table(struct rproc *rproc
 static const struct rproc_ops imx_rproc_ops = {
 	.prepare	= imx_rproc_prepare,
 	.attach		= imx_rproc_attach,
+	.detach		= imx_rproc_detach,
 	.start		= imx_rproc_start,
 	.stop		= imx_rproc_stop,
 	.kick		= imx_rproc_kick,
@@ -720,6 +745,9 @@ static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
 	struct device *dev = priv->dev;
 	struct mbox_client *cl;
 
+	if (priv->tx_ch && priv->rx_ch)
+		return 0;
+
You did exactly the same things as in V6.  I asked you why this is needed and
all you did is point me to the code in _probe(), which I can read on my own.

Again - why is this needed when we know it will be done in start() and attach()?

quoted hunk ↗ jump to hunk
 	if (!of_get_property(dev->of_node, "mbox-names", NULL))
 		return 0;
 
@@ -749,8 +777,15 @@ static void imx_rproc_free_mbox(struct rproc *rproc)
 {
 	struct imx_rproc *priv = rproc->priv;
 
-	mbox_free_channel(priv->tx_ch);
-	mbox_free_channel(priv->rx_ch);
+	if (priv->tx_ch) {
+		mbox_free_channel(priv->tx_ch);
+		priv->tx_ch = NULL;
+	}
+
+	if (priv->rx_ch) {
+		mbox_free_channel(priv->rx_ch);
+		priv->rx_ch = NULL;
+	}
 }
 
 static void imx_rproc_put_scu(struct rproc *rproc)
-- 
2.37.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help