Re: Re: [PATCH v2 04/10] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC
From: Jernej Škrabec <jernej.skrabec@gmail.com>
Date: 2022-10-13 18:46:39
Also in:
linux-arm-kernel, linux-phy, linux-sunxi, linux-usb, lkml
Dne četrtek, 13. oktober 2022 ob 10:49:51 CEST je Icenowy Zheng napisal(a):
在 2022-10-12星期三的 23:21 +0200,Jernej Škrabec写道:quoted
Hi Icenowy, Dne sreda, 12. oktober 2022 ob 07:55:56 CEST je Icenowy Zheng napisal(a):quoted
The F1C100s SoC has one USB OTG port connected to a MUSB controller. Add support for its USB PHY. Signed-off-by: Icenowy Zheng <redacted> --- No changes since v1. drivers/phy/allwinner/phy-sun4i-usb.c | 11 +++++++++++ 1 file changed, 11 insertions(+)diff --git a/drivers/phy/allwinner/phy-sun4i-usb.cb/drivers/phy/allwinner/phy-sun4i-usb.c index 3a3831f6059a..2f94cb77637b 100644--- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c@@ -109,6 +109,7 @@ enum sun4i_usb_phy_type { sun8i_v3s_phy, sun50i_a64_phy, sun50i_h6_phy, + suniv_f1c100s_phy, }; struct sun4i_usb_phy_cfg {@@ -859,6 +860,14 @@ static int sun4i_usb_phy_probe(structplatform_device *pdev) return 0; } +static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { + .num_phys = 1, + .type = suniv_f1c100s_phy,I think you should just use sun4i_a10_phy. It has no special handling. I don't see a point adding new phy types if there is no special cases for it.Sounds reasonable, although I think we should finally drop .type and use only describing items.
That would be even better. Will you do it?
quoted
Best regards, Jernejquoted
+ .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = true, +}; + static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { .num_phys = 3, .type = sun4i_a10_phy,@@ -988,6 +997,8 @@ static const struct of_device_idsun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun50i-a64-usb-phy", .data = &sun50i_a64_cfg}, { .compatible = "allwinner,sun50i-h6-usb-phy", .data =&sun50i_h6_cfg },quoted
+ { .compatible = "allwinner,suniv-f1c100s-usb-phy", + .data = &suniv_f1c100s_cfg }, { }, }; MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); -- 2.37.1