[PATCH v3 16/34] dt-bindings: pinctrl: qcom,msm8226: add functions and input-enable
From: Krzysztof Kozlowski <hidden>
Date: 2022-09-27 17:39:46
Also in:
linux-arm-msm, linux-gpio, lkml
Subsystem:
arm/qualcomm mailing list, open firmware and flattened device tree bindings, pin control subsystem, pin controller - qualcomm, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Bjorn Andersson, Linus Torvalds
The MSM8226 pinctrl driver supports input-enable, blsp_i2c4, blsp_uart4
and sdc3 functions and DTS already uses it:
qcom-msm8226-samsung-s3ve3g.dtb: pinctrl@fd510000: 'blsp1-i2c1', 'blsp1-i2c2', 'blsp1-i2c3', 'blsp1-i2c4', 'blsp1-i2c5' ...
qcom-apq8026-lg-lenok.dtb: pinctrl@fd510000: touch-state: 'oneOf' conditional failed, one must be fixed:
'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <redacted>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
---
.../bindings/pinctrl/qcom,msm8226-pinctrl.yaml | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index a64e2dbb0972..9c2dbc1e31fe 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml@@ -79,9 +79,10 @@ $defs: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] + blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3, + wlan ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16]
@@ -90,13 +91,10 @@ $defs: Selects the drive strength for the specified pins, in mA. bias-pull-down: true - bias-pull-up: true - bias-disable: true - + input-enable: true output-high: true - output-low: true required:
--
2.34.1