Thread (1 message) 1 message, 1 author, 2022-09-03

Re: [PATCH 07/12] riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree

From: Peter Korsgaard <peter@korsgaard.com>
Date: 2022-09-03 15:21:32
Also in: linux-riscv, linux-sunxi, lkml

quoted
quoted
quoted
quoted
"Samuel" == Samuel Holland [off-list ref] writes:
 > "D1 Nezha" is Allwinner's first-party development board for the D1 SoC.
 > It was shipped with 512M, 1G, or 2G of DDR3. It supports onboard audio,
 > HDMI, gigabit Ethernet, WiFi and Bluetooth, USB 2.0 host and OTG ports,
 > plus low-speed I/O from the SoC and a GPIO expander chip.

 > Most other D1 boards copied the Nezha's power tree, with the 1.8V rail
 > powered by the SoCs internal LDOA, analog domains powered by ALDO, and
 > the rest of the board powered by always-on fixed regulators. Some (but
 > not all) boards also copied the PWM CPU regulator. To avoid duplication,
 > factor out the out the regulator references that are common across all

NIT: s/out the out the/out the/

-- 
Bye, Peter Korsgaard
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help