[PATCH 05/14] arm64: dts: qcom: pmk8350: drop interrupt-names from ADC
From: Krzysztof Kozlowski <hidden>
Date: 2022-08-28 08:44:13
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
The SPMI PMIC VADC and Thermal Monitoring ADC have only one interrupt line and their bindings do not allow interrupt-names. None of other variants use them, so drop it from DTSI. Signed-off-by: Krzysztof Kozlowski <redacted> --- arch/arm64/boot/dts/qcom/pmk8350.dtsi | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 97c9f8ece2a6..a7ec9d11946d 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi@@ -39,7 +39,6 @@ pmk8350_vadc: adc@3100 { #address-cells = <1>; #size-cells = <0>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "eoc-int-en-set"; #io-channel-cells = <1>; };
@@ -47,7 +46,6 @@ pmk8350_adc_tm: adc-tm@3400 { compatible = "qcom,adc-tm7"; reg = <0x3400>; interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "threshold"; #address-cells = <1>; #size-cells = <0>; #thermal-sensor-cells = <1>;
--
2.34.1