[PATCH] arm64: dts: qcom: sc7280-herobrine: Don't enable the USB 2.0 port

The USB 2.0 port of sc7280 is currently not used by any herobrine
board. Delete the device tree entries that enable it.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
I was also told that the 2.0 port is for the Embedded USB Debugger
(EUD) only, but I'm not sure if that's true. From the Linux side
it looks like a regular dwc3 controller.

 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 3f8996c00b05..b2f0404d3f71 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi

@@ -606,18 +606,6 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-};
-
 /* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
 
 &dp_hot_plug_det {

-- 
2.37.2.672.g94769d06f0-goog