The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'reg' is a required property
  qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <redacted>
Reviewed-by: Konrad Dybcio <redacted>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 3411ced96db6..166374566a49 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -363,12 +363,6 @@ scm {
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */

@@ -838,9 +832,10 @@ pnoc: interconnect@5c0000 {
 				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
-		tcsr_mutex_regs: syscon@740000 {
-			compatible = "syscon";
+		tcsr_mutex: hwlock@740000 {
+			compatible = "qcom,tcsr-mutex";
 			reg = <0x00740000 0x20000>;
+			#hwlock-cells = <1>;
 		};
 
 		tcsr_1: sycon@760000 {

-- 
2.34.1