[PATCH v2 01/12] dt-bindings: clk: microchip: mpfs: add reset controller support
From: Conor Dooley <conor.dooley@microchip.com>
Date: 2022-07-04 12:16:30
Also in:
linux-clk, linux-riscv, lkml
Subsystem:
common clk framework, open firmware and flattened device tree bindings, risc-v microchip support, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Daire McNamara, Linus Torvalds
The "peripheral" devices on PolarFire SoC can be put into reset, so update the device tree binding to reflect the presence of a reset controller. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> --- .../bindings/clock/microchip,mpfs.yaml | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
index 016a4f378b9b..1d0b6a4fda42 100644
--- a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml@@ -40,8 +40,21 @@ properties: const: 1 description: | The clock consumer should specify the desired clock by having the clock - ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h - for the full list of PolarFire clock IDs. + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of + PolarFire clock IDs. + + resets: + maxItems: 1 + + '#reset-cells': + description: + The AHB/AXI peripherals on the PolarFire SoC have reset support, so from + CLK_ENVM to CLK_CFM. The reset consumer should specify the desired + peripheral via the clock ID in its "resets" phandle cell. + See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of + PolarFire clock IDs. + const: 1 required: - compatible
--
2.36.1