Thread (17 messages) 17 messages, 3 authors, 2022-09-08
STALE1400d
Revisions (17)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 [diff vs current]
  6. v6 [diff vs current]
  7. v7 [diff vs current]
  8. v8 [diff vs current]
  9. v9 [diff vs current]
  10. v10 [diff vs current]
  11. v11 [diff vs current]
  12. v12 [diff vs current]
  13. v13 [diff vs current]
  14. v14 [diff vs current]
  15. v15 [diff vs current]
  16. v16 [diff vs current]
  17. v17 [diff vs current]

[PATCH v2 0/9] Add support for MT8195 SCP 2nd core

From: Tinghan Shen <hidden>
Date: 2022-06-08 09:18:07
Also in: chrome-platform, linux-arm-kernel, linux-mediatek, linux-remoteproc, lkml

The mediatek remoteproc driver currently only allows bringing up a 
single core SCP, e.g. MT8183. It also only bringing up the 1st 
core in SoCs with a dual-core SCP, e.g. MT8195. This series support 
to bring-up the 2nd core of the dual-core SCP.

Tinghan Shen (9):
  dt-binding: remoteproc: mediatek: Support dual-core SCP
  remoteproc: mediatek: Support hanlding scp core 1 wdt timeout
  remoteproc: mediatek: Add SCP core 1 register definitions
  remoteproc: mediatek: Support probing for the 2nd core of dual-core
    SCP
  remoteproc: mediatek: Add chip dependent operations for SCP core 1
  remoteproc: mediatek: Add SCP core 1 SRAM offset
  remoteproc: mediatek: Add SCP core 1 as a rproc subdevice
  remoteproc: mediatek: Wait SCP core 1 probe done
  mfd: cros_ec: Add SCP core 1 as a new CrOS EC MCU

 .../bindings/remoteproc/mtk,scp.yaml          |  13 +
 drivers/mfd/cros_ec_dev.c                     |   5 +
 drivers/remoteproc/mtk_common.h               |  35 ++
 drivers/remoteproc/mtk_scp.c                  | 322 +++++++++++++++++-
 .../linux/platform_data/cros_ec_commands.h    |   2 +
 include/linux/platform_data/cros_ec_proto.h   |   1 +
 6 files changed, 375 insertions(+), 3 deletions(-)

-- 
2.18.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help