[PATCH] dt-bindings: net: adin: use YAML block scalar to avoid parse issue
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
Date: 2022-05-26 04:57:57
Also in:
lkml, netdev
Subsystem:
analog devices inc adin driver, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Hennerich, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
YAML doesn't like colons (:) in text. Use a block scalar so that the
colon in the description text doesn't cause a parse error.
Fixes: 1f77204e11f8 ("dt-bindings: net: adin: document phy clock output properties")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Documentation/devicetree/bindings/net/adi,adin.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
index 77750df0c2c4..88611720545d 100644
--- a/Documentation/devicetree/bindings/net/adi,adin.yaml
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml@@ -37,7 +37,8 @@ properties: default: 8 adi,phy-output-clock: - description: Select clock output on GP_CLK pin. Two clocks are available: + description: | + Select clock output on GP_CLK pin. Two clocks are available: A 25MHz reference and a free-running 125MHz. The phy can alternatively automatically switch between the reference and the 125MHz clocks based on its internal state.
--
2.36.1