On 2/18/22 00:45, Stephen Boyd wrote:

Quoting Marek Vasut (2022-02-13 09:33:10)

quoted

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6a98291350b64..3ec27842ec779 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile

@@ -68,6 +68,7 @@ obj-$(CONFIG_COMMON_CLK_STM32MP157)   += clk-stm32mp1.o
  obj-$(CONFIG_COMMON_CLK_TPS68470)      += clk-tps68470.o
  obj-$(CONFIG_CLK_TWL6040)              += clk-twl6040.o
  obj-$(CONFIG_ARCH_VT8500)              += clk-vt8500.o
+obj-$(CONFIG_COMMON_CLK_RS9_PCIE)      += clk-renesas-pcie.o

Is there a reason it doesn't go into drivers/clk/renesas?

The drivers/clk/renesas/ is for renesas SoC (R-Car/RZ/...),
this chip is different group (it's probably even IDT PLL IP).

[...]

quoted

+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>

Is this used? If not please remove.

This one is for of_device_get_match_data()

[...]

quoted

+static struct clk_hw *
+rs9_of_clk_get(struct of_phandle_args *clkspec, void *data)
+{
+       struct rs9_driver_data *rs9 = data;
+       unsigned int idx = clkspec->args[0];
+
+       return rs9->clk_dif[idx];
+}
+
+static const struct of_device_id clk_rs9_of_match[];

Why the forward declare?

Remnant from development, dropped.

quoted

+static int rs9_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+       struct device_node *np = client->dev.of_node;
+       unsigned char *name = "DIF0";
+       struct rs9_driver_data *rs9;
+       const char *parent_clk;
+       struct clk_hw *hw;
+       int i, ret;
+
+       rs9 = devm_kzalloc(&client->dev, sizeof(*rs9), GFP_KERNEL);
+       if (!rs9)
+               return -ENOMEM;
+
+       i2c_set_clientdata(client, rs9);
+       rs9->client = client;
+       rs9->chip_info = of_device_get_match_data(&client->dev);

Check for NULL? Use device_get_match_data()? Or does that not work for
i2c devices?

quoted

+
+       /* Fetch common configuration from DT (if specified) */
+       ret = rs9_get_common_config(rs9);
+       if (ret)
+               return ret;
+
+       /* Fetch DIFx output configuration from DT (if specified) */
+       for (i = 0; i < rs9->chip_info->num_clks; i++) {
+               ret = rs9_get_output_config(rs9, i);
+               if (ret)
+                       return ret;
+       }
+
+       /* Mandatory XTal */

Oh it's mandatory here but not in the binding?

quoted

+       parent_clk = of_clk_get_parent_name(np, 0);

Use clk_parent_data please.

This one line I don't understand -- can you expand on what you expect me 
to do here ?

quoted

+       if (!parent_clk)
+               return dev_err_probe(&client->dev, -EINVAL,
+                                    "Missing XTal input clock\n");
+
+       rs9->regmap = devm_regmap_init_i2c(client, &rs9_regmap_config);
+       if (IS_ERR(rs9->regmap))
+               return dev_err_probe(&client->dev, PTR_ERR(rs9->regmap),
+                                    "Failed to allocate register map\n");
+
+       /* Register clock */
+       for (i = 0; i < rs9->chip_info->num_clks; i++) {
+               name[3]++;
+               hw = clk_hw_register_fixed_factor(&client->dev, name,
+                                                 parent_clk, 0, 4, 1);
+               if (IS_ERR(hw))
+                       return PTR_ERR(hw);
+
+               rs9->clk_dif[i] = hw;
+       }
+
+       ret = devm_of_clk_add_hw_provider(&client->dev, rs9_of_clk_get, rs9);
+       if (!ret)
+               rs9_update_config(rs9);
+
+       return ret;
+}

[...]