[PATCH v14 1/9] drm/ingenic: Add support for JZ4780 and HDMI output
flat view
STALE1719d
SUPERSEDED
From: H. Nikolaus Schaller <hidden>
Date: 2022-02-12 14:19:59
Also in:
dri-devel, linux-mips, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, ingenic jz47xx socs, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Paul Cercueil, Linus Torvalds
Status: Superseded by v18 (posted 2022-04-07). [go to v18]
Revision v14 (16 revisions archived).
Revisions (16)
- v3
- v4 [diff against previous]
- v5 [diff against previous]
- v6 [diff against previous]
- v7 [diff against previous]
- v8 [diff against previous]
- v9 [diff against previous]
- v10 [diff against previous]
- v11 [diff against previous]
- v12 [diff against previous]
- v13 [diff against previous]
- v14 current [diff against previous]
- v15 [diff against previous]
- v16 [diff against previous]
- v17 [diff against previous]
- v18 [diff against previous]
From: Paul Boddie <redacted> Add support for the LCD controller present on JZ4780 SoCs. This SoC uses 8-byte descriptors which extend the current 4-byte descriptors used for other Ingenic SoCs. Note that plane f0 is not working and disabled to be seen from user-space. Tested on MIPS Creator CI20 board. Signed-off-by: Paul Boddie <redacted> Signed-off-by: Ezequiel Garcia <redacted> Signed-off-by: H. Nikolaus Schaller <redacted> --- drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 7f10d6eed549d..dcf44cb00821f 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c@@ -65,8 +65,10 @@ struct ingenic_dma_hwdescs { struct jz_soc_info { bool needs_dev_clk; bool has_osd; + bool has_alpha; bool map_noncoherent; bool use_extended_hwdesc; + bool plane_f0_not_working; unsigned int max_width, max_height; const u32 *formats_f0, *formats_f1; unsigned int num_formats_f0, num_formats_f1;
@@ -453,7 +455,7 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane, if (!crtc) return 0; - if (plane == &priv->f0) + if (priv->soc_info->plane_f0_not_working && plane == &priv->f0) return -EINVAL; crtc_state = drm_atomic_get_existing_crtc_state(state,
@@ -1055,6 +1057,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components) long parent_rate; unsigned int i, clone_mask = 0; int ret, irq; + u32 osdc = 0; soc_info = of_device_get_match_data(dev); if (!soc_info) {
@@ -1312,7 +1315,10 @@ static int ingenic_drm_bind(struct device *dev, bool has_components) /* Enable OSD if available */ if (soc_info->has_osd) - regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN); + osdc |= JZ_LCD_OSDC_OSDEN; + if (soc_info->has_alpha) + osdc |= JZ_LCD_OSDC_ALPHAEN; + regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc); mutex_init(&priv->clk_mutex); priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
@@ -1511,7 +1517,9 @@ static const struct jz_soc_info jz4770_soc_info = { static const struct jz_soc_info jz4780_soc_info = { .needs_dev_clk = true, .has_osd = true, + .has_alpha = true, .use_extended_hwdesc = true, + .plane_f0_not_working = true, /* REVISIT */ .max_width = 4096, .max_height = 2048, .formats_f1 = jz4770_formats_f1,
--
2.33.0