Re: [PATCH v16 2/7] arm64: dts: mt8183: add svs device information
From: Matthias Brugger <matthias.bgg@gmail.com>
Date: 2021-12-30 12:54:51
Also in:
linux-arm-kernel, linux-mediatek, linux-pm, lkml
On 28/04/2021 08:54, Roger Lu wrote:
quoted hunk ↗ jump to hunk
add compitable/reg/irq/clock/efuse setting in svs node Signed-off-by: Roger Lu <redacted> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 80519a145f13..441d617ece43 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi@@ -657,6 +657,18 @@ status = "disabled"; }; + svs: svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, + <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", + "t-calibration-data"; + }; + pwm0: pwm@1100e000 { compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>;@@ -941,9 +953,15 @@ reg = <0 0x11f10000 0 0x1000>; #address-cells = <1>; #size-cells = <1>;
Please add a new line between the different calibartion data, to improve readability. Regards, Matthias
+ thermal_calibration: calib@180 {
+ reg = <0x180 0xc>;
+ };
mipi_tx_calibration: calib@190 {
reg = <0x190 0xc>;
};
+ svs_calibration: calib@580 {
+ reg = <0x580 0x64>;
+ };
};
u3phy: usb-phy@11f40000 {