[PATCH 1/5] arm64: dts: exynos: Align MAX77843 nodes with dtschema on TM2
From: Krzysztof Kozlowski <hidden>
Date: 2021-12-29 12:47:08
Also in:
linux-arm-kernel, linux-samsung-soc, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, the rest · Maintainers:
Krzysztof Kozlowski, Linus Torvalds
The newly introduced dtschema for MAX77843 MUIC require the children to have proper naming and a port@0 property. This should not have actual impact on MFD children driver binding, because the max77843 MFD driver uses compatibles. The port@0 is disabled to avoid any impact. Signed-off-by: Krzysztof Kozlowski <redacted> --- Please kindly test or even better - fix the DTS and extcon driver. --- .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index cbcc01a66aab..03f7c9acaacb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi@@ -858,10 +858,10 @@ pmic@66 { interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x66>; - muic: max77843-muic { + muic: extcon { compatible = "maxim,max77843-muic"; - musb_con: musb-connector { + musb_con: connector { compatible = "samsung,usb-connector-11pin", "usb-b-connector"; label = "micro-USB";
@@ -871,6 +871,17 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { + /* + * TODO: The DTS this is based on does not have + * port@0 which is a required property. The ports + * look incomplete and need fixing. + * Add a disabled port just to satisfy dtschema. + */ + reg = <0>; + status = "disabled"; + }; + port@3 { reg = <3>; musb_con_to_mhl: endpoint {
@@ -910,7 +921,7 @@ charger_reg: CHARGER { }; }; - haptic: max77843-haptic { + haptic: motor-driver { compatible = "maxim,max77843-haptic"; haptic-supply = <&ldo38_reg>; pwms = <&pwm 0 33670 0>;
--
2.32.0