[PATCH 2/4] dt-bindings: power: supply: maxim,max77693: convert to dtschema
From: Krzysztof Kozlowski <hidden>
Date: 2021-12-28 16:39:51
Also in:
linux-leds, linux-pm, lkml
Subsystem:
maxim muic charger drivers for exynos based boards, maxim pmic and muic drivers for exynos based boards, open firmware and flattened device tree bindings, power supply class/subsystem and drivers, the rest · Maintainers:
Krzysztof Kozlowski, Chanwoo Choi, Rob Herring, Conor Dooley, Sebastian Reichel, Linus Torvalds
Convert the Charger bindings of Maxim MAX77693 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max77693.txt. Signed-off-by: Krzysztof Kozlowski <redacted> --- .../bindings/power/supply/maxim,max77693.yaml | 70 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 71 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 000000000000..a21dc1a8890f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml@@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77693-charger + + maxim,constant-microvolt: + description: | + Battery constant voltage in uV. The charger will operate in fast + charge constant current mode till battery voltage reaches this level. + Then the charger will switch to fast charge constant voltage mode. + Also vsys (system voltage) will be set to this value when DC power is + supplied but charger is not enabled. + Valid values: 3650000 - 4400000, step by 25000 (rounded down) + minimum: 3650000 + maximum: 4400000 + default: 4200000 + + maxim,min-system-microvolt: + description: | + Minimal system voltage in uV. + enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000, + 3600000, 3700000] + default: 3600000 + + maxim,thermal-regulation-celsius: + description: | + Temperature in Celsius for entering high temperature charging mode. + If die temperature exceeds this value the charging current will be + reduced by 105 mA/Celsius. + enum: [70, 85, 100, 115] + default: 100 + + maxim,battery-overcurrent-microamp: + description: | + Overcurrent protection threshold in uA (current from battery to + system). + Valid values: 2000000 - 3500000, step by 250000 (rounded down) + minimum: 2000000 + maximum: 3500000 + default: 3500000 + + maxim,charge-input-threshold-microvolt: + description: | + Threshold voltage in uV for triggering input voltage regulation loop. + If input voltage decreases below this value, the input current will + be reduced to reach the threshold voltage. + enum: [4300000, 4700000, 4800000, 4900000] + default: 4300000 + +required: + - compatible + +additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index b5e4f14f6768..ead08768fb78 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS@@ -11681,6 +11681,7 @@ M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> L: linux-pm@vger.kernel.org S: Supported +F: Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml F: drivers/power/supply/max14577_charger.c F: drivers/power/supply/max77693_charger.c
--
2.32.0