[PATCH 1/3] arm64: dts: qcom: sc7280: Add pinmux for I2S speaker and Headset
From: Srinivasa Rao Mandadapu <hidden>
Date: 2021-12-23 15:44:30
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm chromebook support, arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Add AMP enable node and pinmux for primary and secondary I2S for SC7280 based platforms. Signed-off-by: Srinivasa Rao Mandadapu <redacted> Co-developed-by: Venkata Prasad Potturu <redacted> Signed-off-by: Venkata Prasad Potturu <redacted> --- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 11 +++++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 55 ++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71..86f182c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi@@ -491,6 +491,17 @@ }; &tlmm { + amp_en: amp-en { + pinmux { + pins = "gpio63"; + function = "gpio"; + }; + pinconf { + pins = "gpio63"; + bias-pull-down; + }; + }; + nvme_pwren: nvme-pwren { function = "gpio"; };
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 937c2e0..b5ebc9ec 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi@@ -3461,6 +3461,61 @@ }; }; + pri_mi2s_active: primary_mi2s_active { + sclk { + pins = "gpio97"; + function = "mi2s0_sck"; + drive-strength = <16>; + }; + ws { + pins = "gpio100"; + function = "mi2s0_ws"; + drive-strength = <16>; + }; + data0 { + pins = "gpio98"; + function = "mi2s0_data0"; + drive-strength = <16>; + }; + data1 { + pins = "gpio99"; + function = "mi2s0_data1"; + drive-strength = <16>; + }; + }; + + pri_mi2s_mclk_active: pri-mi2s-mclk-active { + pinmux { + pins = "gpio96"; + function = "pri_mi2s"; + }; + }; + + sec_mi2s_active: sec-mi2s-active { + sclk { + pins = "gpio106"; + function = "mi2s1_sck"; + drive-strength = <16>; + bias-disable; + output-high; + }; + + ws { + pins = "gpio108"; + function = "mi2s1_ws"; + drive-strength = <16>; + output-high; + }; + + data0 { + pins = "gpio107"; + function = "mi2s1_data0"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + qup_uart8_cts: qup-uart8-cts { pins = "gpio32"; function = "qup10";
--
2.7.4