Thread (3 messages) 3 messages, 2 authors, 2021-12-22
STALE1658d

[PATCH] arm64: dts: qcom: sm8350: Correct UFS symbol clocks

From: Bjorn Andersson <hidden>
Date: 2021-12-22 00:25:38
Also in: linux-arm-msm, lkml
Subsystem: arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers: Bjorn Andersson, Konrad Dybcio, Linus Torvalds

The introduction of '9a61f813fcc8 ("clk: qcom: regmap-mux: fix parent
clock lookup")' broke UFS support on SM8350.

The cause for this is that the symbol clocks have a specified rate in
the "freq-table-hz" table in the UFS node, which causes the UFS code to
request a rate change, for which the "bi_tcxo" happens to provide the
closest rate.  Prior to the change in regmap-mux it was determined
(incorrectly) that no change was needed and everything worked. Instead
mimic the configuration found in other platforms, by omitting the rate
for the symbol clocks as well to avoid the rate change.

While at it also fill in the dummy symbol clocks that was dropped from
the GCC driver as it was upstreamed.

Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Bjorn Andersson <redacted>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index bc176c252bca..ceb064a83038 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -38,6 +38,24 @@ sleep_clk: sleep-clk {
 			clock-frequency = <32000>;
 			#clock-cells = <0>;
 		};
+
+		ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
+
+		ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
+
+		ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
 	};
 
 	cpus {
@@ -606,9 +624,9 @@ gcc: clock-controller@100000 {
 				 <0>,
 				 <0>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&ufs_phy_rx_symbol_0_clk>,
+				 <&ufs_phy_rx_symbol_1_clk>,
+				 <&ufs_phy_tx_symbol_0_clk>,
 				 <0>,
 				 <0>;
 		};
@@ -2079,8 +2097,8 @@ ufs_mem_hc: ufshc@1d84000 {
 				<75000000 300000000>,
 				<0 0>,
 				<0 0>,
-				<75000000 300000000>,
-				<75000000 300000000>;
+				<0 0>,
+				<0 0>;
 			status = "disabled";
 		};
 
-- 
2.33.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help