[PATCH 10/10] arm64: dts: qcom: sm6350: Fix validation errors
From: Luca Weiss <hidden>
Date: 2021-12-13 08:27:54
Also in:
linux-arm-msm, lkml, phone-devel
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Sort clocks and interrupts as specified in the docs and remove the stray property #power-domain-cells from aoss_qmp to solve dtbs_check validation errors. Signed-off-by: Luca Weiss <redacted> --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index a7158fe9e192..8322a981cdfc 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi@@ -810,10 +810,10 @@ usb_1_qmpphy: phy@88e9000 { ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&xo_board>, <&rpmhcc RPMH_QLINK_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, - <&xo_board>; - clock-names = "aux", "ref", "com_aux", "cfg_ahb"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>;
@@ -871,11 +871,12 @@ usb_1: usb@a6f8800 { "sleep"; interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>;
@@ -935,7 +936,6 @@ aoss_qmp: power-controller@c300000 { mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; }; spmi_bus: spmi@c440000 {
--
2.34.1