[PATCH 0/3] Add STM32MP13 EXTI support
From: Alexandre Torgue <alexandre.torgue@foss.st.com>
Date: 2021-12-08 13:05:55
Also in:
linux-arm-kernel, lkml
Enhance stm32-exti driver to support STM32MP13 SoC. This SoC uses the same
hardware version than STM32MP15. Only EXTI line mapping is changed and
following EXTI lines are supported: GPIO, RTC, I2C[1-5], UxART[1-8],
USBH_EHCI, USBH_OHCI, USB_OTG, LPTIM[1-5], ETH[1-2].
regards
Alex
Alexandre Torgue (3):
dt-bindings: interrupt-controller: stm32-exti: document
st,stm32mp13-exti
irqchip/stm32-exti: add STM32MP13 support
ARM: dts: stm32: Enable EXTI on stm32mp13
.../interrupt-controller/st,stm32-exti.yaml | 1 +
arch/arm/boot/dts/stm32mp131.dtsi | 7 +++
drivers/irqchip/irq-stm32-exti.c | 50 +++++++++++++++++++
3 files changed, 58 insertions(+)
--
2.17.1