'#interrupt-cells' is not documented which causes a warning when
'unevaluatedProperties' is implemented. Unless the I2C controller is
also an interrupt controller, '#interrupt-cells' is not valid. This
doesn't appear to be the case from the driver, so just remove it from
the example.

Cc: Brendan Higgins <redacted>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <redacted>
Cc: Rayn Chen <redacted>
Cc: linux-i2c@vger.kernel.org
Cc: openbmc@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
index ea643e6c3ef5..f597f73ccd87 100644
--- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml

@@ -63,7 +63,6 @@ examples:
     i2c0: i2c-bus@40 {
       #address-cells = <1>;
       #size-cells = <0>;
-      #interrupt-cells = <1>;
       compatible = "aspeed,ast2500-i2c-bus";
       reg = <0x40 0x40>;
       clocks = <&syscon ASPEED_CLK_APB>;

-- 
2.32.0