Dear Greg KH, Arnd:

-----Original Message-----
From: Greg KH <gregkh@linuxfoundation.org>
Sent: Friday, December 3, 2021 6:39 PM
To: Tony Huang <tonyhuang.sunplus@gmail.com>
Cc: derek.kiernan@xilinx.com; dragan.cvetic@xilinx.com; arnd@arndb.de;
linux-kernel@vger.kernel.org; robh+dt@kernel.org; devicetree@vger.kernel.org;
Wells Lu 呂芳騰 [off-list ref]; Tony Huang 黃懷厚
[off-list ref]
Subject: Re: [PATCH v2 2/2] misc: Add iop driver for Sunplus SP7021

On Fri, Dec 03, 2021 at 11:48:45AM +0800, Tony Huang wrote:

quoted

IOP (IO Processor) embedded inside SP7021 which is used as Processor
for I/O control, RTC wake-up and cooperation with CPU & PMC in power
management purpose.
The IOP core is DQ8051, so also named IOP8051, it supports dedicated
JTAG debug pins which share with SP7021.
In standby mode operation, the power spec reach 400uA.

Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com>
---
Changes in v2:
 - Addressed comments from Arnd Bergmann.
 - Addressed comments from Greg KH.
 - Addressed comments from kernel test robot.

 MAINTAINERS                    |   1 +
 drivers/misc/Kconfig           |   1 +
 drivers/misc/Makefile          |   1 +
 drivers/misc/iop/Kconfig       |  13 ++
 drivers/misc/iop/Makefile      |   6 +

Why do you need a subdirectory for a single .c file?

1. Currently my bin file is placed in the root file system. I need to wait for the kernel booting to succeed before loading the bin code.
2. In addition, I need the kernel booting process to be able to mount the iop module and load bin file.I need to put bin file in /iop.
Do you have a good way to load bin code during kernel booting?

Thanks