On Sat, Nov 27, 2021 at 8:25 PM Cosmin Tanislav [off-list ref] wrote:

The AD74412R and AD74413R are quad-channel software configurable input/output
solutions for building and process control applications. They contain
functionality for analog output, analog input, digital input, resistance
temperature detector, and thermocouple measurements integrated
into a single chip solution with an SPI interface.
The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
four configurable input/output channels and a suite of diagnostic functions.
The AD74413R differentiates itself from the AD74412R by being HART-compatible.

When configured with channel 0 as voltage output, channel 1 as current
output, channel 2 as voltage input and channel 3 as current input, the
following structure is created under the corresponding IIO device.

.
├── in_current0_offset
├── in_current0_raw
├── in_current0_sampling_frequency
├── in_current0_sampling_frequency_available
├── in_current0_scale
├── in_voltage1_offset
├── in_voltage1_raw
├── in_voltage1_sampling_frequency
├── in_voltage1_sampling_frequency_available
├── in_voltage1_scale
├── in_voltage2_offset
├── in_voltage2_raw
├── in_voltage2_sampling_frequency
├── in_voltage2_sampling_frequency_available
├── in_voltage2_scale
├── in_current3_offset
├── in_current3_raw
├── in_current3_sampling_frequency
├── in_current3_sampling_frequency_available
├── in_current3_scale
├── out_voltage0_raw
├── out_voltage0_scale
├── out_current1_raw
├── out_current1_scale
├── name
├── buffer
│   ├── data_available
│   ├── enable
│   ├── length
│   └── watermark
└── scan_elements
    ├── in_current0_en
    ├── in_current0_index
    ├── in_current0_type
    ├── in_voltage1_en
    ├── in_voltage1_index
    ├── in_voltage1_type
    ├── in_voltage2_en
    ├── in_voltage2_index
    ├── in_voltage2_type
    ├── in_current3_en
    ├── in_current3_index
    └── in_current3_type

Signed-off-by: Cosmin Tanislav <redacted>

From a GPIO point of view there is nothing to complain about here
so:
Reviewed-by: Linus Walleij <redacted>

Yours,
Linus Walleij