[PATCH v3 07/10] bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional
From: Fenglin Wu <hidden>
Date: 2021-11-29 08:26:52
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, open firmware and flattened device tree bindings, spmi subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Stephen Boyd, Linus Torvalds
From: David Collins <redacted> Mark all interrupt related properties as optional instead of required. Some boards do not required PMIC IRQ support and it isn't needed to handle SPMI bus transactions, so specify it as optional. Signed-off-by: David Collins <redacted> Signed-off-by: Fenglin Wu <redacted> --- Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
index ca645e2..6332507 100644
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt@@ -29,6 +29,8 @@ Required properties: - #size-cells : must be set to 0 - qcom,ee : indicates the active Execution Environment identifier (0-5) - qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5) + +Optional properties: - interrupts : interrupt list for the PMIC Arb controller, must contain a single interrupt entry for the peripheral interrupt - interrupt-names : corresponding interrupt names for the interrupts
--
2.7.4