On Mon, 22 Nov 2021 01:53:44 +0100
Peter Rosin [off-list ref] wrote:

Hi Liam!

On 2021-11-15 04:43, Liam Beguin wrote:

quoted

Hi Jonathan, Peter,

Apologies for not getting back to you sooner. I got caught up on other
work and wasn't able to dedicate time to this earlier. Hopefully, this
time around, I'll be able to get this to the finish line :-)

I left out IIO_VAL_INT overflows for now, so that I can focus on getting
the rest of these changes pulled in, but I don't mind adding a patch for
that later on.

This series focuses on adding temperature rescaling support to the IIO
Analog Front End (AFE) driver.

The first few patches address minor bugs in IIO inkernel functions, and
prepare the AFE driver for the additional features.

The main changes to the AFE driver include an initial Kunit test suite,
support for IIO_VAL_INT_PLUS_{NANO,MICRO} scales, and support for RTDs
and temperature transducer sensors.

Thanks for your time,  

And thanks for yours!

quoted

Liam

Changes since v8:
- reword comment
- fix erroneous 64-bit division
- optimize and use 32-bit divisions when values are know to not overflow
- keep IIO_VAL_FRACTIONAL scale when possible, if not default to fixed
  point  

This is not what is going on. Patch 9/14 will convert all fractional
scales to fixed point. But I would really like if you in the "reduce
risk of integer overflow" patch (8/14) would hold true to the above
and keep the fractional scale when possible and only fall back to
the less precise fractional-log case if any of the multiplications
needed for an exact fractional scale causes overflow.

The v8 discussion concluded that this was a valid approach, right?

I know you also said that the core exposes the scale with nano
precision in sysfs anyway, but that is not true for in-kernel
consumers. They have an easier time reading the "real" scale value
compared to going via the string representation of fixed point
returned from iio_format_value. At least the rescaler itself does so,
which means that chaining rescalers might suffer needless accuracy
degradation.

So, please add the overflow fallback thingy right away, it would make
me feel much better.

quoted

- add test cases
- use nano precision in test cases
- simplify offset calculation in rtd_props()

Changes since v7:
- drop gcd() logic in rescale_process_scale()
- use div_s64() instead of do_div() for signed 64-bit divisions
- combine IIO_VAL_FRACTIONAL and IIO_VAL_FRACTIONAL_LOG2 scale cases
- switch to INT_PLUS_NANO when accuracy is lost with FRACTIONAL scales
- rework test logic to allow for small relative error
- rename test variables to align error output messages

Changes since v6:
- rework IIO_VAL_INT_PLUS_{NANO,MICRO} based on Peter's suggestion
- combine IIO_VAL_INT_PLUS_{NANO,MICRO} cases
- add test cases for negative IIO_VAL_INT_PLUS_{NANO,MICRO} corner cases
- force use of positive integers with gcd()
- reduce risk of integer overflow in IIO_VAL_FRACTIONAL_LOG2
- fix duplicate symbol build error
- apply Reviewed-by

Changes since v5:
- add include/linux/iio/afe/rescale.h
- expose functions use to process scale and offset
- add basic iio-rescale kunit test cases
- fix integer overflow case
- improve precision for IIO_VAL_FRACTIONAL_LOG2

Changes since v4:
- only use gcd() when necessary in overflow mitigation
- fix INT_PLUS_{MICRO,NANO} support
- apply Reviewed-by
- fix temperature-transducer bindings

Changes since v3:
- drop unnecessary fallthrough statements
- drop redundant local variables in some calculations
- fix s64 divisions on 32bit platforms by using do_div
- add comment describing iio-rescaler offset calculation
- drop unnecessary MAINTAINERS entry

Changes since v2:
- don't break implicit offset truncations
- make a best effort to get a valid value for fractional types
- drop return value change in iio_convert_raw_to_processed_unlocked()
- don't rely on processed value for offset calculation
- add INT_PLUS_{MICRO,NANO} support in iio-rescale
- revert generic implementation in favor of temperature-sense-rtd and
  temperature-transducer
- add separate section to MAINTAINERS file

Changes since v1:
- rebase on latest iio `testing` branch
- also apply consumer scale on integer channel scale types
- don't break implicit truncation in processed channel offset
  calculation
- drop temperature AFE flavors in favor of a simpler generic
  implementation

Liam Beguin (14):
  iio: inkern: apply consumer scale on IIO_VAL_INT cases
  iio: inkern: apply consumer scale when no channel scale is available
  iio: inkern: make a best effort on offset calculation
  iio: afe: rescale: expose scale processing function
  iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  iio: afe: rescale: add offset support
  iio: afe: rescale: use s64 for temporary scale calculations
  iio: afe: rescale: reduce risk of integer overflow
  iio: afe: rescale: fix accuracy for small fractional scales  

Can you please swap the order of these two patches? (i.e. "reduce
risk..." and "fix accuracy...")

Basically, I think the accuracy of the IIO_VAL_FRACTIONAL_LOG2
case should be improved before the IIO_VAL_FRACTIONAL case is
joined with it. I.e. swap the order of 8/14 and 9/14 (or almost,
you need to also move the addition of the
scale_type == IIO_VAL_FRACTIONAL condition to the other patch in
order for it to make sense).

That's all I'm finding. But then again, I don't know what to do
about the 0day report on 10/14. It does say that it's a W=1
build, maybe we need not worry about it?

W=1 won't affect that undefined symbols error.

I'd be cynical and assume it's a random issue, post a v10 perhaps
with a note in the cover letter on this.

Jonathan

Cheers,
Peter

quoted

  iio: test: add basic tests for the iio-rescale driver
  iio: afe: rescale: add RTD temperature sensor support
  iio: afe: rescale: add temperature transducers
  dt-bindings: iio: afe: add bindings for temperature-sense-rtd
  dt-bindings: iio: afe: add bindings for temperature transducers