Thread (26 messages) 26 messages, 5 authors, 2021-12-02

Re: [PATCH v15 1/8] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml

From: Andreas Kemnade <andreas@kemnade.info>
Date: 2021-11-17 21:40:08
Also in: linux-arm-kernel, linux-hwmon, linux-pm, lkml

On Wed, 10 Nov 2021 22:29:41 +1000
Alistair Francis [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Initial support for the Silergy SY7636A Power Management chip
and regulator.

Signed-off-by: Alistair Francis <redacted>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-for-MFD-by: Lee Jones [off-list ref]
---
 .../bindings/mfd/silergy,sy7636a.yaml         | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 000000000000..0566f9498e2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
[...]
+  regulators:
+    type: object
+
+    properties:
+      compatible:
+        const: silergy,sy7636a-regulator
+
+      vcom:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        properties:
+          regulator-name:
+            const: vcom
+
hmm, this is what? If I understand it correctly, vcom means some
voltage for compensation. On other comparable pmics (e.g. TPS65185
which has also a sane public datasheet, MAX17135) I have seen some
methods to measure a voltage while the display is doing something
defined and then program this voltage non-volatile for compensation
during manufacturing.

If I understand the code correctly all the bunch of voltages are
powered up if this one is enabled.
So at least a description should be suitable.

The other comparable PMICs have at least regulators named VCOM, DISPLAY
(controls several regulators, started with delays configured via
registers) and V3P3. MAX17135 source can be found in NXP kernels, 
TPS65185 in Kobo vendor kernels.

So I would expect to see something similar here and a description or at
least not such a misleading name as vcom if it is for some reason not
feasible to separate the regulators.

Regards,
Andreas
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help