A72 Cluster (chapter 1.3.1 [1]) has 48KB Icache, 32KB Dcache and 1MB L2 Cache
 - ICache is 3-way set-associative
 - Dcache is 2-way set-associative
 - Line size are 64bytes

32KB (Dcache)/64 (fixed line length of 64 bytes) = 512 ways
512 ways / 2 (Dcache is 2-way per set) = 256 sets.

So, correct the d-cache-sets info.

[1] https://www.ti.com/lit/pdf/spruiu1

Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---

Changes since V1:
* subject line fixup to stay in sync with other patches
* type in chapter (',' replaced with '.')

V1: https://lore.kernel.org/linux-arm-kernel/20211113024348.29257-1-nm@ti.com/T/#u (local)

 arch/arm64/boot/dts/ti/k3-j7200.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index 47567cb260c2..958587d3a33d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi

@@ -62,7 +62,7 @@ cpu0: cpu@0 {
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 

@@ -76,7 +76,7 @@ cpu1: cpu@1 {
 			i-cache-sets = <256>;
 			d-cache-size = <0x8000>;
 			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
+			d-cache-sets = <256>;
 			next-level-cache = <&L2_0>;
 		};
 	};

-- 
2.32.0