[PATCH 06/11] arm64: dts: ls1028a-rdb: reorder nodes to be alphabetic
From: Li Yang <hidden>
Date: 2021-11-12 22:35:30
Also in:
linux-arm-kernel, linux-pci, lkml
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
Keep these overrides node in alphabetic order in order to prevent unnoticed duplicated nodes. Signed-off-by: Li Yang <redacted> --- .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 92 +++++++++---------- 1 file changed, 46 insertions(+), 46 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 49ec2821d15f..81d0f3ac27ec 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts@@ -102,6 +102,52 @@ can-transceiver { }; }; +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&enetc_mdio_pf3 { + /* VSC8514 QSGMII quad PHY */ + qsgmii_phy0: ethernet-phy@10 { + reg = <0x10>; + }; + + qsgmii_phy1: ethernet-phy@11 { + reg = <0x11>; + }; + + qsgmii_phy2: ethernet-phy@12 { + reg = <0x12>; + }; + + qsgmii_phy3: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&enetc_port0 { + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; +}; + +&enetc_port2 { + status = "okay"; +}; + &esdhc { sd-uhs-sdr104; sd-uhs-sdr50;
@@ -192,52 +238,6 @@ rtc@51 { }; }; -&duart0 { - status = "okay"; -}; - -&duart1 { - status = "okay"; -}; - -&enetc_mdio_pf3 { - /* VSC8514 QSGMII quad PHY */ - qsgmii_phy0: ethernet-phy@10 { - reg = <0x10>; - }; - - qsgmii_phy1: ethernet-phy@11 { - reg = <0x11>; - }; - - qsgmii_phy2: ethernet-phy@12 { - reg = <0x12>; - }; - - qsgmii_phy3: ethernet-phy@13 { - reg = <0x13>; - }; -}; - -&enetc_port0 { - phy-handle = <&sgmii_phy0>; - phy-connection-type = "sgmii"; - managed = "in-band-status"; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - sgmii_phy0: ethernet-phy@2 { - reg = <0x2>; - }; - }; -}; - -&enetc_port2 { - status = "okay"; -}; - &mscc_felix { status = "okay"; };
--
2.25.1