[PATCH v3 1/3] dt-bindings: serial: renesas,scif: Make resets as a required property
STALE1781d
LANDED: 10 (10M)
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: 2021-11-10 23:29:32
Also in:
linux-renesas-soc, linux-serial, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, tty layer and serial drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Revision v3 of 3 in this series; 2 review trailers; landed in mainline as 0836150c26c4 on 2021-11-25.
Revisions (3)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 current
Make "resets" as required property for RZ/G2L. On RZ/G2L the devices should be explicitly pulled out of reset for this reason make "resets" as required property. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2->v3 * No Change --- Documentation/devicetree/bindings/serial/renesas,scif.yaml | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index 6b8731f7f2fb..21fbfa880e29 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml@@ -153,6 +153,7 @@ if: enum: - renesas,rcar-gen2-scif - renesas,rcar-gen3-scif + - renesas,scif-r9a07g044 then: required: - resets
--
2.17.1