[RFC PATCH v3 8/8] dt-bindings: net: dsa: qca8k: add LEDs definition example
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-11-09 02:27:04
Also in:
linux-doc, linux-leds, lkml, netdev
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, qualcomm atheros qca8k dsa switch driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Christian Marangi, Linus Torvalds
Add LEDs definition example for qca8k using the offload trigger as the default trigger and add all the supported offload triggers by the switch. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- .../devicetree/bindings/net/dsa/qca8k.yaml | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 48de0ace265d..106d95adc1e8 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml@@ -64,6 +64,8 @@ properties: internal mdio access is used. With the legacy mapping the reg corresponding to the internal mdio is the switch reg with an offset of -1. + Each phy have at least 3 LEDs connected and can be declared + using the standard LEDs structure. properties: '#address-cells':
@@ -340,6 +342,24 @@ examples: internal_phy_port1: ethernet-phy@0 { reg = <0>; + + leds { + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + linux,default-trigger = "offload-phy-activity"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + linux,default-trigger = "offload-phy-activity"; + }; + }; }; internal_phy_port2: ethernet-phy@1 {
--
2.32.0